Home

Aura Imaging Devices

MicMag Handy EMF & Microwave Analyser

List Price: Rs.34,600

Our Price: Rs.31,140

10%

You Save: Rs.3,460 (10%)

In Stock

Ships in 3 - 9 Days

Warranty : 3 Years

Rs.31,140

Key Features

Magnetic Field Measurement
Microwave Measurement

Description

The MicMag Handy reads and evaluates magnetic fields & microwaves.

The unique feature of this analyser is its three dimensional measurement capability. This means that it will read any magnetic field present, regardless of where MicMag Handy is directed.

The MicMag Handy shows the relationship between the magnetic field’s intensity and its frequency. When a magnetic field doubles in frequency, the reading will also double. The display goes up to value 2000.

The MicMag Handy measures microwaves up to a range of 2000 relative units. 300 of these relative units correspond to approximately 0.1 mW per centimeter square.

Intensity

The green-yellow-red display grades the measurement value in different intensity ratings:

Green: no increased magnetic field or microwaves.

Yellow: Increased magnetic field or microwaves. It is not advisable to spend a lot of time in this environment.

Red: High magnetic field or microwaves. Spending time in this environment is to be avoided.

Magnetic Field Measurement

To measure magnetic field intensity press the “Magnetic field” button. Measurement activity is indicated by the green LED to the right of this button. Please make sure that the “Microwave” button is not pressed at the same time, as this will result in an incorrect reading.

The measurement of the magnetic field intensity will be shown in the readout display. The corresponding intensity rating (Green, Yellow, Red) will be displayed simultaneously.

You can switch between one and three-dimensional readouts with “1D/3D” switch.

Pressing the “Sound” button activates an acoustic signal.

One and Three Dimensional Measurement

The 1D/3D switch, switches between one-dimensional and three-dimensional.

One-dimensional measurement (1D) only measures the field lines, front to back. This measurement shows where the magnetic field is coming from. Three-dimensional (3D) measurement reads magnetic fields from all directions, adds them together and displays them as one measurement. This has the advantage of including every magnetic field in the vicinity, even if the Analyzer is pointed in the wrong direction, and therefore the measurement is more accurate.

To measure magnetic fields, the following steps must be taken:

1. Measure the magnetic fields with the 3D measurement

2. Switch to 1D measurement

3. Locate the direction of the various magnetic field lines by turning the MicMag Handy around.

PLEASE NOTE: The “1D/3D” switch is inactive when measuring microwaves.

Microwave Measurement

To measure microwave radiation press the “Microwave” button. Measurement activity is indicated by the green LED to the left of this button. Please make sure that the “Magnetic Field” button is not pressed at the same time, as this will result in an incorrect reading.

The measurement of the microwave radiation will be shown in the readout display. The corresponding intensity rating (Green, Yellow, Red) will be displayed simultaneously.

Pressing the “Sound” button activates an acoustic signal.

The measurement antenna for microwaves is located above the readout display.

Acoustic Representation of Measurements (Sound)

The MicMag Handy has a plezo electric buzzer via which the measured field intensity can be made audible. To activate, press the “Sound” button.

The pitch corresponds to the intensity of the field.

This function is useful in an environment where the measurement exceeds the maximum value of the readout display.

Technical Data

Magnetic Field Measurement

Measurement Range: 0-2.000 nT (nano-Tesla)

Measurement Type: One/Three Dimensional frequency dependent readout

Measurement Accuracy: typically +/- 20%

Intensity Rating: Yellow approx. 100 nT; Red approx. 400 nT

Microwave Measurement

Frequency Range: min. 3GHz Resonance

Frequency: approx.. 2.45 GHz

General

Power: 9V battery

Current Consumption: typically 5.5 mA for 1D measurements without “sound”

Readout Display: 3.5 stages

The MicMag Handy reads and evaluates magnetic fields & microwaves. The unique feature of this analyser is its three dimensional measurement capability. This means that it will read any magnetic field present, regardless of where MicMag Handy is directed. The MicMag Handy shows the relationship between the magnetic field’s intensity and its frequency. When a magnetic field doubles in frequency, the reading will also double. The display goes up to value 2000. The MicMag Handy measures microwaves up to a range of 2000 relative units. 300 of these relative units correspond to approximately 0.1 mW per centimeter square. Intensity The green-yellow-red display grades the measurement value in different intensity ratings: Green: no increased magnetic field or microwaves. Yellow: Increased magnetic field or microwaves. It is not advisable to spend a lot of time in this environment. Red: High magnetic field or microwaves. Spending time in this environment is to be avoided. Magnetic Field Measurement To measure magnetic field intensity press the “Magnetic field” button. Measurement activity is indicated by the green LED to the right of this button. Please make sure that the “Microwave” button is not pressed at the same time, as this will result in an incorrect reading. The measurement of the magnetic field intensity will be shown in the readout display. The corresponding intensity rating (Green, Yellow, Red) will be displayed simultaneously. You can switch between one and three-dimensional readouts with “1D/3D” switch. Pressing the “Sound” button activates an acoustic signal. One and Three Dimensional Measurement The 1D/3D switch, switches between one-dimensional and three-dimensional. One-dimensional measurement (1D) only measures the field lines, front to back. This measurement shows where the magnetic field is coming from. Three-dimensional (3D) measurement reads magnetic fields from all directions, adds them together and displays them as one measurement. This has the advantage of including every magnetic field in the vicinity, even if the Analyzer is pointed in the wrong direction, and therefore the measurement is more accurate. To measure magnetic fields, the following steps must be taken: 1. Measure the magnetic fields with the 3D measurement 2. Switch to 1D measurement 3. Locate the direction of the various magnetic field lines by turning the MicMag Handy around. PLEASE NOTE: The “1D/3D” switch is inactive when measuring microwaves. Microwave Measurement To measure microwave radiation press the “Microwave” button. Measurement activity is indicated by the green LED to the left of this button. Please make sure that the “Magnetic Field” button is not pressed at the same time, as this will result in an incorrect reading. The measurement of the microwave radiation will be shown in the readout display. The corresponding intensity rating (Green, Yellow, Red) will be displayed simultaneously. Pressing the “Sound” button activates an acoustic signal. The measurement antenna for microwaves is located above the readout display. Acoustic Representation of Measurements (Sound) The MicMag Handy has a plezo electric buzzer via which the measured field intensity can be made audible. To activate, press the “Sound” button. The pitch corresponds to the intensity of the field. This function is useful in an environment where the measurement exceeds the maximum value of the readout display. Technical Data Magnetic Field Measurement Measurement Range: 0-2.000 nT (nano-Tesla) Measurement Type: One/Three Dimensional frequency dependent readout Measurement Accuracy: typically +/- 20% Intensity Rating: Yellow approx. 100 nT; Red approx. 400 nT Microwave Measurement Frequency Range: min. 3GHz Resonance Frequency: approx.. 2.45 GHz General Power: 9V battery Current Consumption: typically 5.5 mA for 1D measurements without “sound” Readout Display: 3.5 stages

MicMag Handy EMF & Microwave Analyser

Key Features

Description

Features

One and Three Dimensional Measurement

Look for Similar Items by Category

Contact Us

Others

My Account

Help

Payment Options